WIDE BELT SANDERS
The calibrating and sanding machine is used in the processing of the wooden piece in order to calibrate and/or sand the latter with the result of making it smooth and ready for a possible finish. The calibration phase allows to reduce the thickness of the panel by removing a layer and making it perfectly straight; sanding instead makes the surface completely smooth. Both phases are carried out by passing the piece underneath abrasive belts which are more or less hard depending on how much material is to be removed and the type of wood to be worked.
SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES
SECOND-HAND WIDE BELT SANDER VIET CHALLENGE 211/B RR - CE RULES
SECOND HAND DMC Unisand USK 1350 M3 Wide belt through feed sander with 3 belts
SECOND HAND WIDE BELT SANDER SCM SANDYA CL 110
SECOND-HAND WIDE BELT SANDER SANDINGMASTER TIMESAVERS MOD. 33-SFRTF-900 - CE RULES
SECOND-HAND WIDE BELT SANDER DMC MOD. POLISAND
SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES
SECOND-HAND 3 ROLLERS WIDE BELT SANDER SANDINGMASTER - 900 MM.
SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES
Official Dealers
Italiano