MULTI SAW MJ1300*3 – CE

Описание продукции

MULTI SAW MJ1300*3 WITH 8 LASER UNITS INCLUDED– CE
OD of saw blade: 205mm
Main motor power: 15kW
1~12m/min (frequency feeding, feeding motor: 1.5kW)
OD of main spindle: 80mm, spindle speed: 2600r/min
Thickness of raw panel: 4~25mm ( Not standard)
Max. Width of raw panel: 1300mm. The max effective distance for two saw
blade is 1290mm.
Min width of raw panel: 650mm. If put smaller width than this size:
Put the single board stay in the middle of machine for processing to keep the
feeding rollers pressure in balance.
II.If put different width board into the machine, then keep the distance of each
board evenly to assure the balance of the pressure from the top feeding rollers.
Install the bottom feeding roller with steel teeth roller bar and top with steel smooth rollers
Machine is sent with 10 pcs of saw blade ( Thickness is 2.2mm)
The spindle and the top pressure frame are adjusted by manual.
Two different spacers are offered according to client’s product size.
Oversize: 2030mm*1790mm*1230mm
Voltage 380V/50HZ/3PH