DREMA Fair / September 10th – 13th 2019
We invite you to the largest meeting of woodworking and furniture industries in Central and Eastern Europe! From September 10th to 13th we will exhibit at the International Trade Fair DREMA, in the city of Poznań in Poland.
For more information, please write to: firstname.lastname@example.org
HALL 6 – STAND 29
WE’LL PRESENT OUR TS400 SAW
TS 400 THIN CUTTING HORIZONTAL BANDSAW
– SPECIAL DEVICE “OFFSET”: After each cut the blade automatically comes down according to the measure, which the operator has set up in the PLC control. Therefore, it is possible to cut the timber from the top to the bottom and this increases cutting speed and precision
– DEVICE “DOUBLE SPEED”: Thanks to a special sensor, the machine starts to cut the timber at a low speed, immediately after the saw-blade is inside the wood the cutting speed increases and this raises speed, precision and blade working hours
– Max. cutting capacity 420×200 mm
– Distance from blade to conveyor 2-150mm
– Min. cutting thickness 0.75 mm
– Saw wheel diam. 800 mm.
– Saw wheel thickness 50 mm
– Sawblade length 5500 mm.
– Sawblade width 50 mm.
– Sawblade speed 17-34 m/s
– Conveyor belt size 400x4200mm
– Oil mist cooling system
– High accuracy hydraulic blade tension system (2500 kg)
– Variable feed speed 0-25 m/min
– Feed motor 2HP with inverter
– Main motor 30 HP with inverter
– Blade lift motor 2 HP
– Dust hood outlet diam. 125 mm x 2
– Machine net weight Kg. 3100
– Air loaded pressure roller
– Slow cutting start function
– Spraying jets for blade lubrication
– Motor IE3 INCLUDED
– CE rules