COLD PRESS
PAIR OF N. 2 BENDING PRESSES CGYJ 160 DII - CYLINDER DIAM. 194 - OPENING MM. 1000 - STROKE MM. 500 - TIMER FOR AUT. OPENING - TOP-BOTTOM MOVEMENT - VERTICAL PROTECTION ON FRONT SIDE, AND FIXED NETS ON THE OTHER SIDES - PRESSURE 160 TONS - CE RULES - High speed approach, slow speed with soft pressure
Find out more
2 SPINDLES PLANER
GT-635ARD DOUBLE SURFACE PLANER (25”)
Find out more
ORBITAL SANDER
ORBITAL SANDER MOD. LOR 2A 200 Motor Kw 4 Abrasive belts length mm 1260 Abrasive belts width mm 80 Min/max workpiece diam. Min mm 10 – max mm 100 Min curvature radius mm 200 Diam. feeding roller mm 140 Installed power Kw 4,4 Feeding motor Kw 0,18 Diam. suction hood mm 120 Feeding Speed adjustable by inverter min.0 max 10 Dimensions mm 810X860x h1420 Net Weight Kg. 530
Find out more
LONGITUDINAL SANDER
LONGITUDINAL BELT SANDER MOD. LON RO 300 -Workable pieces section Squared, rectangular -Working piece dimensions Thickness: 10/70 mm Width: 20/120 mm Lenght: 200/1300 mm -Machine composition 1 sanding unit 1 feeding unit -Pneumatic belt oscillation and tightening -Sanding motor power kW 5,5 -Feeding motor power kW 0,37 -Abrasive belt dimensions mm 3500 x 260 -Abrasive sanding belt speed adjustable by belt transmission -Feeding speed adjustable by gearmotor -Suctions N.1 ø 120 -Auxiliary power supply V 110 - Hz 50
Find out more
THIN CUTTING HORIZONTAL BANDSAW
HORIZONTAL BAND RESAW HBR-400 30+2+0,5HP/3HP -maximum material size (w x h) (400 x 250 mm) -distance from blade to conveyor 1/4" x 10- 5/8" (3-250mm) -minimum cut piece 3mm -saw wheel diameter 32" x 2 (800 mm x 2) -sawblade lenght 5860 ~5870 mm -sawblade width 2" -sawblade speed 17-38 m/sec -conveyor belt sizes (w x l) 16" x 165- 1/2" (400 x 4200 mm) -feed speed (variable) 0"~25" m/min -conveyor height from floor 37" (940 mm) -feed inverter motor: 2hp / saw wheel motor: 30hp -blade lift motor 1/2 hp dust hood outlet diameter 100 mm x 2 (4" x 2)
Find out more
PIT CLAMP
PIT HYDRAULIC CLAMP MOD. STU1000 - CE RULES
Find out more
THIN CUTTING HORIZONTAL BANDSAW
TS 400 THIN CUTTING HORIZONTAL BANDSAW
Find out more
CLAMP WITH FOLDING BENCHES
HYDRAULIC CLAMP WITH FOLDING BENCHES CASELLI MOD. SBL - CE - pump motor kw 4 - N. 3 hydraulic cylinders - Speed adjusting device - double pedal - n.4 adjustable templates - electrical panel -working dimensions 1300x800 mm
Find out more
CLAMP COUPLE FOR CHAIR ASSEMBLY
HYDRAULIC CLAMP COUPLE FOR CHAIR ASSEMBLING CASELLI MOD. CSP/BI - CE -chair assembling system for flat o slightly curved backs -benches with hydraulic tilting cylinders, motorized inclination -pump motor kw 4 -production assembled chairs/hour 60/120
Find out more
MULTIRIP SAW
MULTIPLE RIP SAW MRS-350 - SHORT STOCK CUTTING DEVICE - CE
Find out more
We invite you to the BIFE International Fair! From September 12th to 15th we will exhibit at the BIFE Fair 2019, in the city of Bucarest in Romania.
HALL B1 – STAND 318
We invite you to the largest meeting of woodworking and furniture industries in Central and Eastern Europe! From September 10th to 13th we will exhibit at the International Trade Fair DREMA, in the city of Poznań in Poland.
For more information, please write to: info@casellispa.com
HALL 6 – STAND 29
TS 400 THIN CUTTING HORIZONTAL BANDSAW
Technical details:
– SPECIAL DEVICE “OFFSET”: After each cut the blade automatically comes down according to the measure, which the operator has set up in the PLC control. Therefore, it is possible to cut the timber from the top to the bottom and this increases cutting speed and precision
– DEVICE “DOUBLE SPEED”: Thanks to a special sensor, the machine starts to cut the timber at a low speed, immediately after the saw-blade is inside the wood the cutting speed increases and this raises speed, precision and blade working hours
– Max. cutting capacity 420×200 mm
– Distance from blade to conveyor 2-150mm
– Min. cutting thickness 0.75 mm
– Saw wheel diam. 800 mm.
– Saw wheel thickness 50 mm
– Sawblade length 5500 mm.
– Sawblade width 50 mm.
– Sawblade speed 17-34 m/s
– Conveyor belt size 400x4200mm
– Oil mist cooling system
– High accuracy hydraulic blade tension system (2500 kg)
– Variable feed speed 0-25 m/min
– Feed motor 2HP with inverter
– Main motor 30 HP with inverter
– Blade lift motor 2 HP
– Dust hood outlet diam. 125 mm x 2
– Machine net weight Kg. 3100
– Air loaded pressure roller
– Slow cutting start function
– Spraying jets for blade lubrication
– Motor IE3 INCLUDED
– CE rules
Contact us to get more informations.
We are pleased to invite you from 27th to 31st May 2019 at the Fair LIGNA.
Biennial world exhibition for woodworking technology.
You’ll find us at STAND G15 – HALLE 027
We are pleased to invite you from 26th to 30th March 2019 at the Fair TECHNOMEBEL.
INTER EXPO CENTER – 147, Tsarigradsko shosse Blvd., Sofia, Bulgaria
Hall 3, Stand A2
https://technomebel.bg/index.php/en/
We will be closed for Christmas holidays from December 22th 2018 to January 1st 2019, included